NOTE: DIAGRAMS & ILLUSTRATION NOT TO SCALE.
9
ACCESSORIES
Decorative
Volcanic Stone P/N 110791 VFVS
Brass P/N 053751 AC - SPB
Black P/N 053752 AC - BLK
Adjustable Canopy
Damper Clamp P/N 110701 DCK
Thermostat P/N 064248 WTK
Remote Control Kit P/N 064453 RCK
Wall Switch Kit P/N 064035 WSK
Damper Clamp Kit
A Damper Clamp Kit is available for use when
required by local codes. Using the damper
clamp to fix open the fireplace damper will
allow this vent free product to be utilized as a
vented decorative gas log set, (see details on
pages 3 and 4).
Wall Switch Kit*
An optional wall switch kit can be installed
along with all vent-free appliances. The kit
consists of a standard UL wall switch with
cover plate. This kit provides for remote (wall)
operation of the appliance. Replace the wall
switch and cover plate of this kit with the
components of the RCK and you can have true
remote control of your vent-free appliance,
turning it on and off from your favorite easy
chair. The wall switch kit should be installed
along with the appliance.
Wall Thermostat Kit*
A wall thermostat kit is available for use with
these appliances. The wall thermostat is de-
signed to be wired directly to the appliance
millivolt gas control circuit and provide auto-
matic On/Off control of the appliance to main-
tain a desired temperature within the room.
Decorative Volcanic Stone
The decorative volcanic stone, Model VFVS,
can be used to enhance the look of your appli-
ance. Spread the decorative volcanic stone
evenly around the bottom of the firebox.
Adjustable Canopy
An attractive black or brass canopy kit is avail-
able for use with these VF appliances. The
canopy kit is designed to be fitted to the wall
above the firebox opening. In addition to pro-
viding an aesthetically pleasing appearance,
the canopy reduces heat effects to decorative
mantles and finish materials located directly
above the fireplace opening. The canopy kit
includes the necessary attaching hardware.
*Use 18GA, solid two conductor wire to
connect these kits to the appliance.