6.
1 Turn razor ON.
2 Push up Trimmer Slide Switch.The Trimmer can be
activated while the razor is running.
3 Hold Trimmer as shown and move in downward strokes
with gentle pressure.
4 Close Trimmer by sliding Trimmer switch down.
5 Turn razor OFF.
CLEANING
Once A Week:Razor
1 Always turn razor OFF, unplug from outlet and remove
cord from razor before cleaning.
2 Clean the top of the razor with the supplied brush.
3 Press Razor Head Release Button and remove Razor
Head Assembly from the razor unit.
4 Brush the inside of housing and Razor Head Assembly.
5 Replace the Razor Head Assembly back on razor.
To Next Page
