Noritz N-063S Series Instruction Manual

13. Clean the water heater with fresh water for 3 minutes or more to rinse the flushing solution.
For Condensing units only : Place a bucket under the water heater to drain water from the "Water Drain Valve".
Carefully unscrew the "Water Drain Valve" to rinse the flushing solution, and then
close it.
14. Close the "V4 Valve", and then remove both drain hoses (H1 and H3).
16. Plug the water heater into electrical power, and the power ON/OFF Button "on" on the remote controller.
17.
Open the "Water Outlet Valve (V2)" and "Gas Supply Valve".
18. Check for the correct operation of the water heater.
Water Drain Valve
(Condensing Units Only)
Pg.4

Noritz N-063S Series Specifications

General

Brand	Noritz
Model	N-063S Series
Category	Water Heater
Language	English