To Next PageTo Next Page
Need help?Do you have a question about the Noritz N-0751M-OD and is the answer not in the manual?
General| Brand | Noritz |
|---|---|
| Model | N-0751M-OD |
| Category | Water Heater |
| Language | English |
Explains the meaning of risk level icons (DANGER, WARNING, CAUTION) and other symbols used in the manual.
Warns about fire and explosion risks associated with storing or using flammable materials near the heater.
Alerts to the danger of severe burns from excessively hot water, especially for children, elderly, or disabled.
Covers restrictions on indoor installation, maintaining clearances, and avoiding enclosed spaces.
Warns against storing or using flammable liquids, vapors, or combustibles near the unit.
Stresses ensuring gas and power supply match the unit's rating plate for safe operation.
Advises on cleaning the water inlet filter and managing water hardness to prevent scale formation.
Covers running water through the unit, preventing freezing, and checking vents.
Provides instructions on cleaning, handling, and proper use of the remote controller.
Illustrates and labels the primary components of the outdoor wall-hanging main unit.
Explains the display screen, Burner On Indicator, and Priority Indicator on the remote.
Details the function of Power On/Off, Setting Buttons, and Flow Meter Alarm Set buttons.
Describes how error codes are displayed on the remote controller when a failure occurs.
Details opening the water and gas supply valves as part of the initial setup process.
Covers confirming water availability via a fixture and turning on the power.
Explains how to mute or unmute the audible feedback sounds from the remote controller.
Describes pressing the Power On/Off button to start the water heater operation.
Warns about scalding risks from water over 125°F and advises caution when using the unit.
Explains how to set and adjust the desired water temperature using the remote control.
Details preparation steps and powering on the unit before setting the flow meter alarm.
Guides on setting the desired water temperature before configuring the flow meter alarm.
Instructs to turn off the power and hold the flow meter alarm set button to initiate temperature adjustment.
Details using the setting buttons to change the maximum output temperature of the hot water.
Explains the automatic freeze prevention heater and its limitations when the power is unplugged.
Advises on protecting external plumbing with insulation or heat tape against freezing.
Provides steps for preventing freezing in extremely cold temperatures, including running hot water.
Lists items to check for periodic inspection, including combustibles, sounds, appearance, and leaks.
Guides on cleaning the exterior of the main equipment with a wet cloth and mild detergent.
Provides instructions for cleaning the remote controller surface with a wet cloth, avoiding harsh chemicals.
Addresses problems like unit not igniting or attempting to ignite but failing.
Covers scenarios where hot water is unavailable, too hot, or takes time to heat.
Explains how to identify and interpret error codes displayed on the remote controller.
Details procedures for requesting service, including initial troubleshooting and warranty information.
Covers stocking periods for repair parts and guidelines for appliance reinstallation.
Covers model name, type, dimensions, weight, connections, and installation details.
Details power supply, materials used, safety devices, and included accessories.
Outlines performance metrics, consumption, hot water capacity, and temperature options.
