MAINTENANCE AND CARE
CLEANING Attachments and hose should be wiped down with a disinfectant wipe after each client.
STORAGE When not in use, hang the attachments on hooks or place in drawer.
GENERAL The NormaTec Recovery System attachments and device should be kept away from liquids to avoid damage.
SETTING UP THE NORMATEC PULSE
STEP 1 Select the appropriate attachment (legs, hips, arms) for the client’s needs.
If using the leg attachments, choose the appropriate size: the standard leg attachment will fit most clients. For clients with a wider thigh
circumference, “power” size leg attachments are available in all heights.
Short Boot Standard Boot Tall Boot
Up to 5’3” 5'3" to 6'3" Greater than 6’3”
STEP 2 Help the client get the attachment(s) on and zip them all of the way up (legs) or fasten all buckles (hips/arms).
Buckle straps do not need to be cinched tight. All attachments custom mold to the client’s body every time.
Leg Attachment
Hip Attachment
Arm Attachment
STEP 3 Connect the hose to the air outlet on the front of the PULSE 2.0
device.
STEP 4 Connect the hose to the attachment.
ZONE
BOOST
1
2
STEP 5 Press the Power Button on the top of the PULSE Control Unit to turn on the system.
Page 2 of 3
1. Power Button
2. Air Outlet and Power Inlet
To Next Page
Loading...
Need help?
General
