4) Remove the top cover first. Then unscrew the two screws
from top bracket and replace on the other side.
5) To install the bracket on the left side of the appliance,
screw the two screws through the bracket and into the
top of the appliance. Slide the door back on to the top
hinge. Ensure the door is face up. Replace the top cover
on the top bracket by screw the two screws.
6) Screw the bottom hinge into place on the new side.
Replace the foot
on the other side.
7) Check that the door is aligned horizontally and vertically
and that the seals are closed on all sides before finally
tightening the bottom hinge. Readjust the leveling feet.
To Next Page
Loading...
