8.4 EMC
The NX12 has been designed and manufactured to meet the following standards.
Emissions EN61326-1: 2006 Class B Emissions, Industrial locations
EN55011 Mains terminal disturbance voltage
EN55011 Electromagnetic radiation disturbance
EN61000-3-2 Harmonic current emissions
EN61000-3-3 Flicker (not applicable)
Immunity EN61326-1:
EN61000-4-2 ESD
EN61000-4-3 EM Field
EN61000-4-4 Burst
EN61000-4-6 Conducted RF
EN61000-4-8 Power Frequency Magnetic Field
EN61000-4-11 Voltage Dips and Interruptions
8.5 Environmental
Enclosure Rating: IP54
Humidity: 0-95% non-condensing
Temperature: PCB: -20 to +70 degrees C.
Battery: -60 to +85 degrees C.
GSM modem: -40 to +85 degrees C.
Storage: The NX12 should be stored in an environment that is dry,
corrosive-free, and not in direct sunlight.
Correct storage prevents premature component failures
caused by environmental factors such as moisture or corrosive
gases. Exposure to high humidity or corrosive environments
will prematurely degrade the electronic components in any
electronic device regardless of its use or manufacturer.
To Previous Page
Loading...