To Next PageTo Next Page
Need help?Do you have a question about the North American Tool 5466 and is the answer not in the manual?
Safety warnings about chemicals in dust and product.
Technical details of the chainsaw including engine size and bar length.
General safety guidelines for operating the chainsaw safely.
Describes rotational, pinch, and pull-in kickback occurrences.
Provides advice on preventing kickback during operation.
Step-by-step instructions for mounting the guide bar and chain.
Instructions for safely mixing gasoline and two-stroke oil for the engine.
Guidelines for safely refueling the chainsaw with the mixed fuel.
Procedures and precautions for starting and operating the engine.
Procedure to verify the chain oil is being supplied correctly.
Explanation of the automatic and manual chain brake functions.
Steps to safely shut down the chainsaw engine.
How to switch the operating mode to prevent carburetor icing.
Basic advice and precautions for performing sawing tasks.
Using the oiling port and checking the chain brake to prevent kickback.
Detailed steps and safety considerations for safely felling trees.
Techniques for cutting logs into manageable pieces and removing branches.
Safety steps before performing any maintenance or cleaning.
Instructions for cleaning the air filter to maintain engine performance.
Verifying the oiling port is clear and guide bar is maintained.
Inspecting for fuel leaks, loose parts, and damage.
Cleaning cylinder fins to prevent engine overheating.
Checking the sprocket for wear and damage, and replacement criteria.
How to sharpen the saw chain for optimal cutting performance.
Checking the guide bar rail for squareness and wear.
Diagnosing and resolving issues preventing the engine from starting.
Addressing problems with engine power, acceleration, and idling.
Troubleshooting why the chain oil may not be dispensing correctly.
Outlines the terms and conditions of the manufacturer's warranty.
Details the owner's duties for maintaining warranty coverage and responsibilities.
Identification of parts related to the chainsaw's handle assembly.
Identification of parts related to the fuel and oil tank assembly.
Components making up the chainsaw's brake belt and housing covers.
Parts related to the brake's spring mechanism and activation levers.
Identification of parts comprising the chainsaw's starter mechanism.
Identification of parts that form the clutch assembly.
Identification of parts that make up the automatic oil pump system.
Identification of parts belonging to the flywheel assembly.
Identification of parts related to the ignition system.
Identification of parts for the main upper housing of the chainsaw.
Identification of parts related to the air filter housing.
Identification of parts that constitute the engine cylinder.
Identification of parts that make up the fuel carburetor.
Identification of parts related to the engine's piston.
Identification of parts that form the engine's crankshaft.
Identification of parts for the main engine crankcase.
Identification of various internal components of the engine assembly.
Explains the EPA-mandated emission control system warranty terms.
Details the owner's duties for maintaining warranty coverage and responsibilities.
Defines the scope and duration of the ECS warranty for engine components.
Lists the specific engine parts covered under the emission control warranty.
Outlines procedures for repair or replacement of warranted parts.
Specifies that only NATI-approved parts should be used for repairs.
Lists components of the fuel metering system covered by warranty.
Lists components of air induction, ignition, and catalytic systems.
General| Brand | North American Tool |
|---|---|
| Model | 5466 |
| Category | Chainsaw |
| Language | English |
