North American Tool 6274

To Next Page

8806274 3/12

Cordless Screwdriver

Charger:

Input: 120V -60Hz

Protection against electric

shock: Class II

Protection against moisture:

IP20

Output: 6V DC, 300mA

Charge time: about 3-5 hours

CALIFORNIA PROPOSITION 65

WARNING: You can create dust

when you cut, sand, drill or

grind materials such as wood,

paint, metal, concrete, cement,

or other masonry. This dust

often contains chemicals

known to cause cancer, birth

defects, or other reproductive

harm. Wear protective gear.

WARNING: This product or its

power cord may contain

chemicals, including lead,

known to the State of California

to cause cancer and birth

defects or other reproductive

harm. Wash hands after

handling.

Specifications

Screwdriver:

Rechargeable battery voltage:

4.8V

Max. Speed: 150rpm

Max. Torque: 2.5Nm

Battery: Ni-CD

Battery capability : 600mAh

Forward/reverse switch

LED Light

3. Insert the

bit into the

chuck

Model: 6274

This unique cordless screwdriver

is equipped with a “flip bit” quick-

loader for maximum convenience.

To load a bit:

1. Rotate the

magazine to

find desired

bit

2. Remove

the bit by

lifting up and

out

To charge the unit:

1. Connect the charger adaptor

to a power outlet and insert the

plug into the socket on the

handle.

2. The red light on the battery

display will light up once the

adaptor is connected to a power

source.

3. Once the battery is completely

charged, the red light will turn off.

If possible, remove the adaptor

after the battery is fully charged.

To unload a bit:

1. Remove the drill bit

from chuck

2. Rotate drill bit down into

“lock” position

feedback@natitools.com

Need help?

Do you have a question about the North American Tool 6274 and is the answer not in the manual?

Summary

Cordless Screwdriver Operation

California Proposition 65 Warnings

Warnings regarding dust and chemicals in the product, advising protective gear and hand washing.

Screwdriver Specifications

Details on battery voltage, speed, torque, battery type, capacity, and switch.

Charger Specifications

Details on charger input, electrical shock protection, moisture protection, and output.

Loading and Unloading Bits

Instructions for loading a bit by rotating the magazine and unloading it by lifting.

Charging the Unit

Steps to connect the charger, monitor the charging light, and disconnect when fully charged.

Screwdriver Usage and Safety

Replacing and Positioning Bits

Instructions for replacing bits and changing the handle position by rotating 90 degrees.

Screwing and Unscrewing Operations

Guide on using the forward/reverse switch to control rotation direction.

General Safety Instructions

Mandatory safety guidelines including protective gear, workspace conditions, and tool handling.

Maintenance and Care

Advice on tool maintenance, cleaning, and avoiding disassembly or misuse.

Limited Warranty Information

Details on the 1-year limited warranty, exclusions, and liability limitations.