To Next PageTo Next Page
Need help?Do you have a question about the North Atlantic VXI 65CS4 and is the answer not in the manual?
General specifications for the motherboard, including DSP, data transfer, and ESD protection.
Detailed specifications for Instrument Grade measurement capabilities, input modes, range, resolution, and accuracy.
Specifications for Instrument Grade stimulus output, including channels, mode, resolution, accuracy, and drive.
Specifications for the Reference Generator on the Instrument Grade Daughter Board, covering voltage, resolution, and accuracy.
Specifications for Embedded Grade stimulus output, including channels, mode, resolution, accuracy, and drive.
Power consumption details for motherboard and daughter boards, listing average current draw for +5V and +/-12V.
Describes the Native Syntax for programming the 65CS4, including addressing and self-test procedures.
Information on the VXI Software Support Kit (SSK), IVI driver, and LabWindows application provided.
Defines the notation used in command syntax, including delimiters for mandatory/optional items and grouping.
Explains the general structure and types of values (<value>, <scientific number>, <decimal number>, etc.) used in commands.
Commands for setting and querying the output angle in degrees for simulator channels.
Commands for setting and querying the DC output scale, defining the full-scale voltage and degrees/sec/V.
Commands to set and query the rotation rate in revolutions per second for simulator channels.
Commands to set and query the stop angle for simulator rotation.
Commands to query the API angle in degrees for measurement channels.
Commands to set and query the DC output scale for API measurement channels.
Commands to set and query the state of I/O isolation relays for API channels.
Commands to set and query the API channel update mode (LATCH/TRACK).
Commands to set and query the internal reference generator frequency in Hz.
Command to initiate self-test and query its status.
Command to reset the unit to its power-up default state.
Explains trigger sources (BUS, INT, EXT, TTL) and slopes for simulator rotation control.
Lists the available commands for Mate/CIIL syntax, such as FNC, CLS, OPN, RST, STA, CNF, IST, INX, FTH.
Defines the notation used in Mate/CIIL syntax, including delimiters for mandatory/optional items and grouping.
Details the RST command for stimulus functions, including results and cleared messages.
Details the RST command for sensor functions, including results and required MCHAR matching.
Provides practical examples of using commands for setting synchro output, reading angles, and controlling rotation.
Outlines the procedure for verifying unit performance, requiring external test equipment.
Step-by-step guide for checking the internal reference functionality using specific commands and equipment.
Procedure to verify simulator performance using an external reference, including angle and API readings.
Procedure to verify the angle rate generation capabilities of the simulator.
Procedure for verifying API measurement using internal reference, covering Synchro and Resolver modes.
Procedure for verifying API measurement using an external reference, covering Synchro mode.
Procedure to verify API measurement for two-speed applications.
Procedure to verify the DC rate output functionality of the simulator.
Information for units sold in the European Union, including classification, installation, safety, and maintenance.
General| Model | 65CS4 |
|---|---|
| Form Factor | VXI |
| Compatibility | VXIbus |
| Cooling | Forced Air |
| Operating Temperature | 0°C to 55°C |
| Humidity | 5% to 95% non-condensing |
| Category | Computer Hardware |
| Storage Temperature | -40°C to 70°C |
| Slot Size | C-size |
