FC35
Sit-Stand Workstation Desktop
Instruction Manual
Fits Most Displays Size: 22 "~32 "
Max Load 6.6~: 19.8Ibs (3~9 kg)
VESA:75×75,100×100mm
Severe personal injury and property damage can result from improper installation or assembly.
Read the following warning carefully before beginning.
● Products must be installed by professional or installer.
● If you do not understand the instructions or have any concerns or questions, please
contact a qualified local installer.
● Do not install or assemble if the product or hardware is damaged or missing, if you
require replacement parts, please contact you local distributor for assistance.
● This product fits most 22"-32" LCD / monitor; maximum weight of LCD / monitor:
9kg / 19.8lbs.
● Installer-friendly and straight forward.
● For safe installation, the desk you are mounting to must support minimum 3 times the
weight of the total load (the mount, the monitor and all accessories weight).
● Do not use this product for other than the original designed.
● This product contain moving parts, please use with caution.
● When installing monitor, please do not damage electrical wiring or power source.
● Installation and routing of monitor cables on the monitor bracket must comply with
electro-technical regulations.
● Importantly, mains- and data-cables must be secured against twisting and squeezing or
shearing.
● The manufacturer will bear no responsibility to the desk of mounting, or incidental
or consequential damages arising thereof.
● The manufacturer disclaims any liability for the modifications, improper installation, or
installation over the specified weight range. The manufacturer will not be liable for any
damages arising out of the use of , or inability to use, the product.
● This product is designed for indoor used only, use of this product outdoor could lead to
product failer and severe personal injury.
▲ This product contains a high pressure gas spring, fire and percussion are prohibited. Also
it is strictly prohibited to dismantle without professionals. Please return to the manufacturer
or hand over to professional agencies if the product is abandoned. In order to ensure
the performance of gas spring, full direction adjustment of the product arm is recommended
several times per month.
We reserve the right to modify or alter instructions. No modification or alteration without formal notice.
Symbols
Tightening Direction
By Hand
Adjustment
loosen in g Di re ct ion
Hex Wrench
Phillips Screwdriver
Pencil
Optional
Warning
Reminder
Open-End Wrench
Hand Drill
Star Wrench
拧紧方向
用手
调整
拧 方向松
六角扳手
螺丝起子
铅笔
可选
警告
提示
开口扳手
手电钻
安全扳手
Remove
移开
定点恒力 加大
定点恒力 减小
+
-
:Torque increase d
:Torque reduced
+
-
:Torque increase d
:Torque reduced
拧紧方向
拧 方向松
Tightening Direction
loosen in g Di re ct ion
NOTE
定点恒力 加大
定点恒力 减小
A、Full adjustment after installation
FC
35
Part List
E GF
2x
1 2 3
4
6
8
9
2x
7
(M5x12)
B
4x
A C
6x
(M6x15)
(3MM)
(4MM)
(5MM)
D
H
4001080101 A1
C、Power and display lines installation
1
2
3
4
a
D
（5mm）
11
9
（5mm）
D
D
（3mm）
10
8
（5mm）
D
3
7
8
8
b
7
(M4x1 2)
4x 4x
(∅10x 4.5x1 .0)∅
360°
FC
35
Max Load:6.6~19.8lbs(3~9kg)
0~3.7"(0~95mm)
180°
95
°
180°
± °12
0~ 0~3.9"( 100mm)
0~2.4"(0~60mm)
+12°/-15°
0~ 0~18.9"( 480mm)
2x
B、Deskmount installation
Tig hten se t screw
flush w it h sur fa ce.
D
（3mm）
6a
4
5
1a
0-
9
5mm
1b
1
5
9
D
（3mm）
6b
5b
5a
To Next Page
Need help?
General