What to do if my North Star Design BLUE DIAMOND has no sound?
If your North Star Design CD Player isn't producing sound, first, double-check the connection to the monitor system. Then, verify the volume level and settings on your amplifier.
What to do if my North Star Design BLUE DIAMOND CD Player remote control doesn't work?
If the remote control for your North Star Design CD Player isn't working, verify that the battery is correctly installed. If it still fails to respond, replace the battery, as it may be dead.
What to do if my North Star Design BLUE DIAMOND CD Player won't play a CD?
If your North Star Design CD Player won't play a CD, check the disc for scratches or dirt. If the disc isn't the problem, and you suspect it was inserted upside down, wait for the 'No disc' message to appear on the display. If the 'No disc' message does not appear, press and hold the 'OPEN/CLOSE' key until the tray opens.
Why is there unwanted noise from my North Star Design CD Player?
If you're experiencing unwanted noise from your North Star Design CD Player, check that all connecting cables are properly connected and functioning correctly.
How to check the power on North Star Design BLUE DIAMOND?
Check the connection to the AC power supply to ensure your North Star Design CD Player is receiving power.
General| Brand | North Star Design |
|---|---|
| Model | BLUE DIAMOND |
| Category | CD Player |
| Language | English |
To Next Page