What to do if spray comes outward from sealing lip of North Star Ultrasonic Jewelry Cleaner?
If the spray is coming outward from the sealing lip of your North Star Ultrasonic Jewelry Cleaner, it's likely that the sealing lip is damaged. The suggested solution is to replace the sealing lip with part number 49434.14.
Why are both nozzles not spraying on my North Star 49436 Ultrasonic Jewelry Cleaner?
If both nozzles on your North Star Ultrasonic Jewelry Cleaner are not spraying, the most likely cause is a dirty filter. You should clean or replace the filter. Refer to the Maintenance section for instructions on how to do this.
How to fix a blocked nozzle on North Star Ultrasonic Jewelry Cleaner?
If the nozzle on your North Star Ultrasonic Jewelry Cleaner is blocked and not spraying, it's probably due to a dirty nozzle. You can twist the nozzle off and clean it using a needle or paperclip.
Why won’t the caster roll on my North Star 49436 Ultrasonic Jewelry Cleaner?
If the caster on your North Star Ultrasonic Jewelry Cleaner won’t roll or swivel, it's likely due to dirt in the caster. Try cleaning the caster to resolve this issue.
General| Brand | North Star |
|---|---|
| Model | 49436 |
| Category | Ultrasonic Jewelry Cleaner |
| Language | English |
To Next Page