5610 Rose Loop NE
Bainbridge Island, WA, USA 98110
(520)780-9030; (206)219-4205 FAX
http://www.highvoltageprobes.com
probes@highvoltageprobes.com
Voltage Probe Manual and Data
North Star High Voltage, Inc.
Rev March 2018
Safety
High Voltage Safety is important. Always ground the probe to a reliable ground
point near the measurement point. Do not touch the probe during high voltage
operation. Stay away from malfunctioning high voltage equipment and ground it
carefully if it must be touched. Failure to ground the probe near the device under
test can also destroy the probe.
13.56 Mhz users should use a 0 ohm series resistor for PVM1..PVM6
To Next Page
Need help?
General
