Why is my North Storm NS-14W-AC Air Conditioner so noisy?
If your North Storm Air Conditioner is noisy, it could be due to the unit not being on a flat, level surface. If possible, place the unit on a flat, level ground. Also, the sound may come from the flowing of the refrigerant inside the air conditioner, which is normal.
What to do if my North Storm NS-14W-AC Air Conditioner shows E2/E4 code?
If your North Storm Air Conditioner displays an E2 or E4 code, it means the water tank is full. Please empty the water tank to resolve this issue.
Why my North Storm NS-14W-AC doesn't start?
If your North Storm Air Conditioner doesn't start when you press the ON/OFF button, several factors could be the cause. It could be that the electric heating mode or the room temperature is too high, in this case, reset the temperature setting to a lower temperature. Another reason may be that the exhaust air hose is not connected or is blocked, so connect or clean the exhaust air hose. Finally, the air inlet may be lower than the setting temperature and blocked, thus you should clean the air inlet.
What to do if North Storm Air Conditioner auto power-off in heating mode?
If your North Storm Air Conditioner auto power-off in heating mode, it is due to heating protection, which activates when the temperature at the air outlet exceeds 158 F0. To fix this, restart the unit at a lower room temperature.
What does E0 code mean on North Storm NS-14W-AC Air Conditioner?
If your North Storm Air Conditioner displays an E0 code, it indicates that the room temperature sensor has failed. Replace the room temperature sensor; the unit can also function without replacing it.
Instructions for cleaning and maintaining the air filter of the air conditioner.
Guidance on cleaning the external surface of the air conditioner unit.
General| Brand | North Storm |
|---|---|
| Model | NS-14W-AC |
| Category | Air Conditioner |
| Language | English |
To Next Page
