Northern Lights NLFTPR150

To Next Page

FUNCTIONAL TRAINER 150LBS X 2

ASSEMBLY INSTRUCTIONS

FUNCTIONAL TRAINER 150LBS X 2

NLFTPR150

OVERALL DIMENSIONS: 59"L X 48"W X 83"H

27 NOVEMBER 2018

Keep This For Warranty

NLFTPR150

LOT:

1-866-420-4560

Northern Lights Fitness

Products Inc.

MADE IN CANADA

Specification

Weight=584.5 lbs

Packed in 9

Box 1

:78.5"x15.5"5.5

:3.87 ft³

:121.5 Lbs

Box 2

:46.25"x16"x7.5

:3.21 ft³

:84 Lbs

Box 3

:44.5"x11.5"x7.5"

:2.22 ft³

:79 Lbs

Box 4,5,6,7,8&9

:12.5"x5"x6.25

:0.226 ft³

:(Each) 50 Lbs

Need help?

Do you have a question about the Northern Lights NLFTPR150 and is the answer not in the manual?

Summary

Functional Trainer Specifications and Overview

Product Information and Contact Details

Provides product name, model number, dimensions, contact details, and lot information.

Component Identification and Parts List

Critical Safety Warning for Assembly

Highlights essential safety precautions to be followed before assembly or use.

Main Frame Assembly Guide

Assembling Side Frames and Rear Braces

Details on bolting the bottom legs, rear uprights, top beam, and attaching rear braces.

Weight Stack and Guide Rod Setup

Installing Guide Rods, Collars, and Retainers

Procedure for installing weight stack supports, guide rods, weight plates, shaft collars, and retainers.

Pulley and Cable System Assembly

Attaching Pulleys and Cable Retainers

Instructions for attaching pulleys, cable retainers, and bar holders to the frame.

Cable Routing and Tension Adjustment

Cable Routing and Final Tensioning

Detailed steps for routing the cable assembly and adjusting cable tension for optimal performance.

Accessory Mounts and Shroud Installation

Installing Back Support and Shroud Mesh

Securing the back support and attaching the optional shroud mesh using provided velcro.

Warranty Information and Usage Precautions

Limited Lifetime Warranty Details

Outlines the terms and conditions of the manufacturer's lifetime warranty against defects.