Need help?Do you have a question about the NorthStar EXPLORER 721EU and is the answer not in the manual?
General| Transmit Power | 25W/1W |
|---|---|
| Waterproof Rating | IPX7 |
| Display Type | LCD |
| GPS | Yes |
| Voltage Range | 13.8 VDC |
| Output Power | 25W |
| Weight | 1.2 kg |
Defines DANGER, WARNING, and CAUTION safety alert symbols used in the manual.
Lists the key features and capabilities of the Northstar VHF Explorer radio.
Describes gimbal and recessed installation methods for the radio.
Covers the initial setup procedures after installation.
Shows the final installation layout with an optional handset.
Lists critical factors for choosing a suitable installation location.
Provides an overview of the radio setup menu options.
Outlines the available options within the DSC setup menu.
Overview of the options available in the DSC CALL menu.
Instructions for making individual DSC calls to other vessels.
Enables calling the most recent incoming caller from the DSC log.
Details on making DSC calls to pre-defined contact groups.
Instructions for sending an 'All Ships' DSC call.
Allows requesting the Latitude/Longitude position of a buddy.
Provides functionality to track the position of selected buddies.
Step-by-step guide on how to send a DSC distress call.
Details how the radio displays and handles incoming distress calls.
Explains the process of receiving a distress call acknowledgement.
Describes how distress relay transmissions are received and processed.
Instructions on how to relay a distress call from the log.
Addresses issues where the transceiver does not power up.
Helps diagnose why the transceiver blows the fuse when powered on.
Addresses transmissions remaining on low power even when high power is selected.
Helps diagnose issues with no position information being displayed.
Provides instructions for entering the user MMSI into the radio.
To Next Page
