Need help?Do you have a question about the Nortik scubi 2 XL and is the answer not in the manual?
Insert bow and stern elements, clip and tense keel rods, ensuring correct orientation.
Install cross ribs under front and back seats, noting open/closed types and placement.
Inflate high pressure sponsons to the correct pressure, using the adapter.
Assemble rudder components, connect steering ropes, and attach the rudder to the kayak stern.
Position and install the third seat in different configurations using the provided sleeves and cross ribs.
Assemble mast, attach sail, and connect ropes and supporting elements to the kayak.
Check pressure regularly due to heating/cooling; manage overpressure valves and re-inflation.
Treat rods with CorroFilm; clean boat skin with fresh water after salt water exposure.
Support boat from bottom when carrying; always wear a life jacket.
Store built-up or disassembled; deflate sponsons; use repair kit for PVC/PU skin.
To Next Page
General