PARTS & ASSEMBLY
ASSEMBLY
Your VINTAGE COLLECTION™ OLD FASHIONED HOT
DOG ROLLER requires very little assembly.
Simply place Stainless Steel Rollers in the Base of the unit, •
making sure the pin fits correctly into the hole on the left hand side
of the Base interior. DO NOT force the pin into the receptacle
or it will strip and then Rollers will not work properly.
Fit the four Canopy Poles into the holes in each corner of the Base. •
Insert the Drip Tray into the slot at the back of the unit.•
Attach the Canopy Top to the Canopy Poles.•
DIAL POSITIONS
Left: Heat / Right: Power
Canopy Top
Canopy Poles
Stainless
Steel Rollers
Base
Drip Tray
To Next Page
Loading...
