ENGLISH
5
PARTS & ASSEMBLY
ASSEMBLY
Your HOT DOG ROLLER requires very little assembly.
• Simply place Stainless Steel Rollers in the Base of the unit, making sure the pin ts
correctly into the hole on the left hand side of the Base interior. DO NOT force the
pin into the receptacle or it will strip and then Rollers will not work properly.
• Fit the four Canopy Poles into the holes in each corner of the Base.
• Insert the Drip Tray into the slot at the back of the unit.
• Attach the Canopy Top to the Canopy Poles.
DIAL POSITIONS
Left: Heat / Right: Power
Canopy Top
Stainless
Steel Rollers
Drip Tray (rear)
Base
Canopy Poles
To Next Page
Loading...
Need help?
General
