ENGLISH
5
PARTS & ASSEMBLY
After Taking the Unit Out of the Box:
1. Wipe down the MARGARITA & SLUSH MAKER exterior with a clean, non-abrasive
cloth or sponge. Thoroughly wash Blending Chamber, Lid and Drip Tray in
warm, sudsy water and thoroughly dry. DO NOT put the Base in water.
2. After drying, rmly attach Blending Chamber to Base by placing the Blending Chamber on
top of Base and twisting Blending Chamber counterclockwise so that it locks into place.
3. If Blending Chamber is attached properly, it will be aligned
with Base so that the Spout is over the Drip Tray.
Blending Chamber
Drip Tray
Base
Lid
Spout
To Next Page
Loading...
