ENGLISH
6
PARTS
ASSEMBLY OF BASE SUPPORT
1. Insert Cross Bar (I) into the square
inserts on the inside of Base Support
(G) and secure from below with two
#2 Bolts and two #5 Flat Washers.
2. Insert the Leg Assembly (H) into the square
inserts between the ends of the Base Support
(G) and fasten from inside with two #4
Bolts, two #6 Flat Washers and two #7 Nut
Caps and from the top with two #2 Bolts.
(A) Bowl & Dome (B) Sugar Shovel (C) Main Unit (D) Display Tray
(E) Push Handle (F) Wheels (G) Base Support (H) Leg Assembly
(I) Cross Bar (J) Screwdriver (K) Wrench #1 (L) Wrench #2
To Next Page
Loading...
