To Next PageTo Next Page
Need help?Do you have a question about the Notch ROPE RUNNER PRO and is the answer not in the manual?
General| Material | Aluminum |
|---|---|
| Rope Compatibility | 11 mm - 13 mm |
| MBS (Minimum Breaking Strength) | 22 kN |
| Certification | EN 12841 |
| Color | Silver |
Explains common warning symbols used in the manual, including risk of injury, safety alerts, and incompatibility.
Describes the use of the Rope Runner Pro on a single strand of rope for ascending, descending, and positioning.
Describes the use of the Rope Runner Pro on a doubled rope for ascending, descending, and positioning.
Illustrates and describes the ascending, stopping, and descending functions of the Rope Runner Pro in SRS mode.
Illustrates and describes the ascending, stopping, and descending functions of the Rope Runner Pro in MRS mode.
Demonstrates the stop and bounce test procedure to check friction settings and device response under load.
Explains how to control rope movement in Stationary Rope System (SRS) mode using the device.
Explains how to control rope movement in Moving Rope System (MRS) mode using the device.
Details the procedures for ascending and descending with the Rope Runner Pro, including safety considerations.
Describes how to move laterally away from or towards the anchor point using the Rope Runner Pro.
Discusses product lifespan, factors affecting it, and conditions for wear.
Provides instructions for cleaning and drying the equipment to maintain its condition and performance.
Outlines proper procedures for storing and transporting the equipment to prevent damage and maintain integrity.
States that repairs or modifications must only be done by the manufacturer and unauthorized changes are prohibited.
Details the lubrication requirements, including frequency and type of lubricant to be used.
