• Do not disturb mode also temporarily disables the Glyph Interface by default. To change this
behaviour, long hold the "Do not disturb" tile in quick settings and turn off the "Mute Glyphs"
toggle.
5. Google assistant
Google Assistant provides a virtual personal assistant experience through a natural language
speech interface to perform a variety of tasks. It can be activated by short holding the power
button or swiping up from the bottom right corner of the screen.
Learn more about things to say to Google Assistant from the Google Assistant app.
6. Battery share
Phone (2) is capable of charging other Qi-compatible wireless charging devices using its wireless
charging coil. To activate this feature, open the Quick Settings menu and toggle the battery
share feature on. The Glyph Interface will light up if the feature is successfully activated.
7. Screenshot
• To capture a screenshot on Phone (2), simultaneously press the volume down and power button.
The image will be stored in the screenshot album in the Google Photos app. By default, this
folder might not be synchronised to the main photo album. To access the album, go to Google
Photos and navigate to the bottom right "Library" tab.
• To take an expanded screenshot, take a normal screenshot rst and wait for a "Capture more"
button to show up on the bottom of the screen. Once tapped, a full page view will be visible for
any scrollable interface. Simply drag the borders to adjust the size of the screenshot.
• The screenshot can also be quickly edited by pressing the pencil icon that pops up after taking
the screenshot. Make any changes like crop, add text, or annotate, then press "Save" on the top
left corner to save the edited screenshot.
8. NFC
• NFC (Near Field Communication) allows Phone (2) to connect to other NFC-supported devices by
placing the two devices in proximity to each other. The most common use is to use Phone (2) as a
virtual credit / debit card through Google Pay.
• It is recommended to keep NFC on for convenience as it does not drain much battery when left
on standby. To toggle this feature off, open the Quick Settings and tap on the "NFC" tile.
To Next Page
Loading...