NOUS P3Z - User Manual

To Next Page

USER MANUAL

Smart ZigBee Bulb P3Z

You will need the Nous Smart Home app. Scan the QR code or download it directly

*and you will need Nous E1, Nous E7 or other Tuya compatible ZigBee

gateway/hub

Turn on the device (your ZigBee hub should already be connected to the app)1.

Make sure the light is blinking fast (if not, power oﬀ - turn on - turn oﬀ - turn on - turn oﬀ - turn2.

on and wait until it starts blinking fast)

Turn on Bluetooth and location on your phone (temporarily)3.

Open the Nose Smart app4.

Click + and add a device5.

An autoscan will appear, prompting you to add a new device.6.

Conﬁrm connection and start pairing7.

Once pairing is complete, you can rename your device if you like and it's ready to use.8.

If autoscan does not see your device, you can select it manually from the list of devices and9.

continue to connect from step 7.

autoscan connection or manual connection

Need help?

Do you have a question about the NOUS P3Z and is the answer not in the manual?

Summary

Detailed instructions for connecting the Smart ZigBee Bulb P3Z via the Nous Smart Home app, covering initial power-up to successful connection.

Guides users through the app's interface for discovering nearby devices and manually selecting types like Smart Sockets or Smart Lighting.

Illustrates the process of selecting the correct ZigBee Smart Gateway within the app to facilitate device pairing.

Explains how to ensure a device is in pairing mode and provides common reset methods for sensors, sockets, and light sources.

Instructions on how to group multiple bulbs or devices within the app for unified control and management.

Covers the prerequisites and initial steps for setting up Echo devices with the Nous Smart Home app and Alexa.

Details on how to enable the Nous Smart Home skill in Alexa and use voice commands to control connected devices.

General