Nouvag Dispenser DP 30 User Manual (English)

Other manuals for Nouvag Dispenser DP 30

Questions and Answers:

H
hsmithAug 4, 2025
Why Nouvag Water Pump doesn't work but the indicator light is on?
- J
  johnsonjoyAug 4, 2025
  If your Nouvag Water Pump's indicator light is on, but the pump isn't working, consider these potential causes: * The control switch may be set too low or to “Off.” Try raising the pump performance by turning the control switch up. * The tubing set might be incorrectly inserted. Ensure it's correctly inserted, paying attention to the direction. * The pedal may not have been pressed. Press the pedal. * The roller clamp may be closed. Open the roller clamp all the way.
D
Daniel RamirezAug 11, 2025
What to do if my Nouvag Medical Equipment device is not functional and the indicator light is off?
- A
  ashleyjacksonAug 12, 2025
  If your Nouvag Medical Equipment device isn't working and the indicator light is off, here's what you can check: * Ensure the control unit is switched on by setting the power switch "I/O" to "I". * Verify the power connection to the mains power supply. * Confirm the operating voltage is correct. * Inspect and replace the fuse if it's faulty.
M
Michelle SmithAug 19, 2025
Why is the pump not working on my Nouvag Medical Equipment, even though the indicator light is on?
- K
  Kent Herrera IIAug 19, 2025
  If the pump on your Nouvag Medical Equipment isn't working but the indicator light is on, consider the following: 1. Check if the control switch is set too low or to the “Off” position. If so, raise the pump performance by turning the control switch up. 2. Verify that the tubing set is correctly inserted, paying attention to the direction. 3. Ensure correct operation by checking the operating instructions. 4. Confirm that the pedal is pressed and the roller clamp is fully open.
M
marcus39Aug 26, 2025
How to fix a Nouvag Medical Equipment pedal that isn't working, even though the indicator light is on?
- M
  Michael PopeAug 26, 2025
  If the pedal of your Nouvag Medical Equipment isn't working while the indicator light is on, it might be due to the pedal not being connected. Ensure the pedal is connected to the socket on the rear of the device. Also, make sure that you are operating the device correctly by checking the operating instructions.