Need help?Do you have a question about the Nouveau Contour iQ and is the answer not in the manual?
General| Battery Type | Not applicable (mains powered) |
|---|---|
| Charging Time | Not applicable (mains powered) |
| Usage Time per Charge | Not applicable (mains powered) |
| Brush Head Type | Not Applicable |
| Cleaning Modes | Not Applicable |
| Timer | Not Applicable |
| Pressure Sensor | Not Applicable |
Explains warning symbols and their meanings.
Covers general safety guidelines for using the device.
Details safety rules specific to the device and its accessories.
Outlines crucial hygiene and safety practices for procedures.
Lists conditions where the procedure must not be performed.
Describes potential complications and adverse reactions.
Specifies necessary training and qualifications for device users.
Defines the device's function, application areas, and target users.
The main screen showing operational status and settings.
Button to start and stop the treatment process.
Buttons for increasing or decreasing the puncture frequency.
Buttons for selecting pre-programmed treatment settings.
Indicator light showing the device's standby status.
Port for connecting the external power supply plug.
Port for connecting the handpiece cable.
Port for connecting the optional foot-operated switch.
Button to turn the device on or off.
Provides specifications like voltage, power consumption, and dimensions.
Lists environmental parameters for safe device operation.
Details available accessories and replacement parts.
Safety precautions for operation, covering condensation, electrical hazards, and tripping risks.
Instructions for placing and preparing the control unit for use.
Steps to connect the device to the mains power supply.
Guide for connecting the optional foot control accessory.
Steps for connecting the handpiece to the control unit.
Procedures for cleaning and disinfecting the device and accessories.
Detailed guide on how to change needle modules safely.
Instructions on applying protective sheaths for hygiene.
Steps for safely filling the needle module with pigment.
Pre-operation checks to ensure the device is functioning correctly.
How to power the control unit on, off, and enter/exit sleep mode.
Settings for frequency, presets, and other operational parameters.
Adjusting the needle protrusion depth for optimal treatment.
Adjusting the speed of needle punctures per second.
How to activate and deactivate the handpiece during operation.
Safety precautions regarding electrical hazards and moisture during maintenance.
Information on professional inspections for the device.
Guidance on suitable cleaning agents and incompatible materials.
Procedures for disinfecting and cleaning device surfaces.
Guidelines for safely transporting and storing the main components.
Specific storage conditions for needle modules.
To Next Page