Nova Bidet Ultra-NOVA - Installation Steps; Mounting Plate and Seat Installation

8
3. Secure Ultra NOVA Seat
2. Install the Mounting Plate
Rubber Sleeve
Mounting Plate
Toilet
Mounting Hole
Mounting Plate Groove
Locking Bracket
Bolt
Installation
Mounting Plate
Toilet Tank
Align the bottom of the Seat with the
Mounting plate, and push toward the
Toilet Tank.
When you hear the "click" sound, it
indicates that it is locked in place.
Anti-skid pad
Note: For uneven ceramic, add 2mm thick pad at the rear end of the Mounting Plate.
A. Push the Rubber Sleeve into the
Mounting Hole of the Toilet.
B. Place Mounting Plate over the
Mounting Holes on the Toilet and
align it using the Cardboard
Installation Guide.
C. Place Locking Brackets over
Mounting Holes.
D. Slide Bolts through the Locking
Bracket and into the Rubber
Sleeves.
E. Tighten Bolts.