Nova Bidet Ultra-NOVA - Installation Guide; Preparation Before Installation

.
7
1. Preparation before installation
Size requirements of bidet seat
A
B
D
C
Before installing the bidet seat:
A. Remove the existing toilet seat
and turn off the Water Supply
Valve.
B. Flush the toilet and hold down
the flush lever or button for 5 to
10 seconds.
C. Place a sponge, rag, or bucket
under the toilets water inlet.
D. Disconnect toilets Water Supply
Hose from the Toilets Water
Inlet.
Installation
Flush Button
Toilets Water Inlet
Water Supply Valve
Water Supply Hose
A. Distance from water tank to the front of
toilet: 19.9” - 21” (505-535mm).
B. Distance from mounting holes to the back
edge of toilet bowl: >2.75” ( 70mm).
C. Spacing between two mounting holes:
4.6” - 7.2” (118-182mm).
D. Distance from mounting hole to water
tank: >1.2” (30mm).