Nova Caddy S2R - Timer Function; Cruise and Pause Function; Digital Display; Manual Speed Controller

11
LOW (Low power): Red Color
3.1.2. Timer Function (Distance function)
When pressed, the trolley run 10 sec (roughly about 10 meter/yard) and stop by itself.
When pressed, the trolley run 20 sec and stop by itself.
When pressed, the trolley run 30 sec and stop by itself.
3.1.3. Cruise and Pause Function:
: One press in order to Pause or Run the trolley. Select the speed to match your pace.
The cart will remember its last setting when you stop, and travel at that speed automatically
when you start again, except when you change the speed knob position.
Power ON/OFF button controls the caddy’s power supply. Press and hold for 2-5
seconds in order to switch the caddy ON or OFF. After you have connected your battery, you
need to press ON, and the battery LED will illuminate. Now your caddy is ready for operation.
3.1.4. Digital Display
Digital display shows the speed level and Timer Function. The speed level is from 1 to 9. Timer
10M/20M/30M function shows as Program a/b/c.
3.1.5. Manual Speed controller
Scrolling of the Manual Rheostat Speed Control knob lets you choose your preferred speed to
suit your space perfectly, and the digital display will show the preferred speed. The speed level is
from 1 to 9.