EasyManua.ls Logo

Nova Caddy S2R - Trouble Shooting; Caddy does not have power; Motor is running, but wheels dont turn; Trolley pulls to left or right

Nova Caddy S2R
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
22
8. Trouble Shooting
SYMPTOM
ACTION
Caddy does not have
power
Make Sure battery is plugged correctly onto cart plug
Check battery charge level
Check all wiring connections and plugs
Depress and hold down power button for at least 5 seconds
Check main control cable at frame hinge
Motor is running, but
wheels dont turn
Check if wheels are secured to axle by split pin
Check the split pin on axle
Check wheel clutches
Trolley pulls to left or
right
Check and make sure the weight in your golf bag is
distributed evenly
Check if wheels is fitted over the clutch and latched to axle
Check if clutch pin is visible at both sides of the axle
Check if the clutch turns freely in one direction only
Do Tracking Adjustment if need ref. To 3.3.1.
Battery lacks power
Check cable connections
Check charger function
Give a new full charge
Ensure you have not completely discharged the battery
Problems attaching
wheels
Make sure you are holding the spring clip down
Sand and smooth axle with Emery cloth to remove excess
paint or burrs
Remove outer cap and adjust quick release catch
9. Frequently Asked Questions
Question 1: I lost my remote control handset. What shall I do?
Reply: You can purchase a new remote handset from your dealer or from
http://www.novacaddy.com directly. After you receive your new remote control, ref to 3.2 to
connect new remote to your trolley.
Question 2: When I connect the battery plug to caddy and turn the main switch on, the
battery indicator lights do not come on.
Replay:
a) Make sure battery is recharged.
b) Check the battery lead cable
c) Open the back of the T-handle with a screwdriver. Make sure the T-handle line plug is in
the right position on the handle electronic board. It will happen when the line of the
caddy is not connected at correct position in security.

Related product manuals