7
Pic 11 Pic 12 Pic 13
Pic 14 Pic 15
8. Unpack remote control and install batteries as indicated in the diagram in the receiver
compartment of the unit. Now you are ready to learn and understand the function of the manual
and remote controls.
9. Installation of seat (Optional)
9.1 Seat bracket is attached to the lower frame using the two clamps provided. Two
clamps with screws on the right and left. Using heating gun or hair dryer to warm and soft
the one piece clamp so it will be easy bend and fit on the frame. Pic 16
Pic 16 Pic 17
To Next Page
Loading...
