Nova 8343-R User Manual

Questions?
Please contact us at
1-800-557-6682
info@novamedicalproducts.com
novamedicalproducts.com
Thank you for choosing NOVA!
1
Remove all parts from box:
(1) Seat Riser, (2) arms (left and right), (2) mounting screws, (2) metal washers, (2)
plastic washers and (2) wing nuts
3
Remove the existing toilet seat and lid from the toilet frame by unscrewing seat
screws located at the rear of the toilet seat.
4
Place the Seat Riser on the toilet frame. The mounting holes on the rear of the Seat
Riser should line up with the mounting holes on the rear of the toilet frame.
Place toilet seat on Seat Riser and align mounting holes with toilet frame. Place the
metal washers onto the mounting screws, and place into mounting holes of toilet
seat, the Seat Riser, and toilet frame. Then place the plastic washers and the wing
nuts onto the mounting screws. Do not tighten the wing nuts completely.
5
• Be sure Seat Riser is in place and secure before each use
• Do not stand on Seat Riser
• Arms must be secure in Seat Riser
IMPORTANT WARNING!
READ THESE DIRECTIONS CAREFULLY BEFORE USE
FAILURE TO DO SO MAY RESULT IN SERIOUS INJURY
Be sure the toilet seat is straight and sits flush on the Seat Riser, then tighten the
wing nuts.
6
2
To attach the arms to the Seat Riser, align each arm with the Seat Riser tubing. The
longer side of the arm should be facing the front of the Seat Riser. Press the brass
buttons on the arm tubes and insert the arm tubing into the Seat Riser tubing. You
should hear a click when the brass buttons are through the first tubing holes (the
second tubing hole on the Seat Riser is for assembly purposes only).
Connect with us!
Facebook: novamedicalprod
Twitter: novamedicalprod
Twitter: novawalkerstalk
Pinterest: novamedicalprod
Seat Riser
H O W T O
ASSEMBLE YOUR
Toilet Seat Riser with Arms
Item # 8343-R, 8344-R
Capacity not to exceed 300 lb
No tools required
All parts included
Arms (left and right)
Easy to follow
step by step
instructions
Mounting Screws, Metal Washers,
Plastic Washers and Wing Nuts
CARE • QUALITY • INNOVATION
THE N OVA PROMISE

Nova 8343-R Specifications

General

Brand	Nova
Model	8343-R
Category	Bathroom Fixtures
Language	English

Summary

Toilet Seat Riser Assembly Instructions

Parts Identification and Removal

Identify and remove all included parts from the box for assembly.

Attaching the Arms to the Seat Riser

Align and insert arms into the Seat Riser tubing, ensuring a click.

Toilet Seat Removal from Frame

Unscrew and remove the existing toilet seat and lid from the toilet frame.

Placing the Seat Riser on the Toilet Frame

Position the Seat Riser on the toilet frame, aligning mounting holes.

Securing the Toilet Seat to the Riser

Attach the toilet seat to the riser using screws, washers, and wing nuts, tightening loosely.

Final Tightening and Seat Check

Ensure the seat is straight and flush before fully tightening wing nuts.

Product Safety and Warnings

Important Usage Warnings

Read carefully; failure to follow may result in serious injury. Ensure secure placement.

Warranty Information

Warranty Coverage Details

Details limited lifetime for frame and one year for parts for original purchaser.

Warranty Exclusions and Limitations

Excludes negligence, misuse, wear, tear, abuse, and unauthorized modifications.

Obtaining Warranty Service

Contact dealer or NOVA directly with purchase details for repair or replacement.

Cleaning and Maintenance Recommendations

Use non-abrasive cleaners; regularly inspect for wear, corrosion, or breakage.