H O W T O
INSTALL YOUR
Item # CH-2000/CH-2000R
CUPHOLDER
1 2
3 4
WHAT’S IN THE BOX
Easy to follow
step-by-step
instructions
No tools required
Quick installation
a. (1) Cupholder
b. (1) Adjustment knob
c. (1) Screw
d. (1) Flexible clamp
with inner clamp
a. b. c. d.
Remove cupholder from container.
Unscrew adjustment knob to
disassemble all parts. Attach the
inner clamp with flange facing
down (Figure 1).
Insert the screw through hole
inside the cupholder. The head of
the screw should be flush against
the inside (Figure 2).
Wrap the flexible clamp around the
inner clamp and insert the screw
through the square cutout in the
flexible clamp and through the
other side (Figure 3).
Tighten the adjustment knob onto
the screw until the cupholder is
secured to tube (Figure 4).
*Updated January 25, 2017
Figure 1
Figure 3 Figure 4
Figure 2
To Next Page
Need help?
General
