Need help?Do you have a question about the Nova NOV-29-001 and is the answer not in the manual?
General| Aspect Ratio | 16:9 |
|---|---|
| Screen Material | Matte White |
| Gain | 1.1 |
| Viewing Angle | 160 degrees |
| Frame Type | Fixed Frame |
| Installation Type | Wall Mount |
| Screen Size | 100 inches |
Position the Top Panel (B) between pergola legs and fasten with 6 screws (E).
Clip the screen housing (A) to the top panel (B) and secure with 4 screws (F).
Unscrew the 90° angled profile from the right side panel (C).
Position and fasten the 90° angled profile to the inner side of the right pergola leg with screws (E).
Unscrew the 90° angled profile from the left side panel (D).
Position and fasten the 90° angled profile to the inner side of the left pergola leg with screws (E).
Slide the screen zippers into the plastic guide rails of side panels C and D.
Vertically position the screen attached to side panels (C & D) against the pergola legs.
Re-fasten side panels (C & D) to the 90° angled profiles.
Test the pull-down screen by pulling it down and lifting it up.
Enjoy your new pull down screen and pergola.
To Next Page