Do you have a question about the NOVACAT 225 ED and is the answer not in the manual?
Indicates machine conformity to engineering and relevant EU guidelines.
Explains various hazard symbols and their meanings for safe operation.
Instructions for connecting the mower unit to the tractor's linkage system.
Guidance on adjusting the tractor's lower links for proper mower operation.
Instructions for correctly installing and adapting the drive shaft.
Procedure for parking the implement outdoors for extended periods.
Steps to safely transition the mower from operational to transport mode.
Steps to safely transition the mower from transport to operational mode.
Details for swiveling the mower bar up to the side for transport.
Details for swiveling the mower bar backwards for transport.
Procedure for safely detaching the mower unit from the tractor.
Guidance on parking the implement in different positions.
Instructions for using the support stand for parking and stability.
Safety advice and precautions for operating on uneven or sloped terrain.
Key checks and preparations required before operating the machine.
Essential safety measures and checks for safe operation.
Guide to the basic operational steps for mowing with the unit.
Instructions for adjusting the machine for optimal mowing performance.
How to adjust and use the conditioning effect for different crops.
Procedure for checking and setting the correct belt tension.
Guidance on setting rotor prong positions for optimal crop conditioning.
Step-by-step instructions for removing and attaching the conditioner unit.
Adjusting side pressure springs for the rubber cylinders.
Procedures for cleaning and greasing the roller conditioner unit.
Setting guiding plates for different swath formations.
Adjusting guiding plates to control the spread width.
Instructions for removing the left-mounted guide plate.
Procedure for attaching the guide plate for swathing.
Explanation of swath discs and their function in forming a narrower swath.
Instructions for installing guide plates on the swath discs.
Adjusting tension springs for different forage densities.
Information on the optional flat cone conveyor for improved swath deposit.
Description of collision protection for the cutting device.
Explanation of how the hydraulic collision safety system operates.
How the spring-loaded hook releases and relocks the cutter bar.
How to adjust the collision safety device for sensitivity.
Crucial safety instruction for all maintenance, service, and repair work.
General recommendations for keeping the implement in good condition.
Information regarding original and non-original spare parts.
Guidelines for cleaning machine components, avoiding high pressure.
Detailed specifications for NOVACAT 225/265 ED models.
List of available optional equipment for the mower.
Details on required hydraulic and electrical connections for tractor attachment.
Specifies the intended operational scope and limitations of the machine.
Information on original components and the implications of using non-approved parts.
Emphasizes the importance of maintaining all safety guards and covers.
Operator awareness of controls and pre-operation safety checks.
How to determine the correct length for the driveshaft.
Important guidelines and speed limits when operating the driveshaft.
Step-by-step guide for cutting the driveshaft to the required length.
Specifications for the deflection angles of the wide-angle joint.
Table detailing lubrication intervals and types for machine components.
How to identify required lubricants using product code numbers.
Different ways to attach the implement based on tractor width.
Detailed instructions for repairing the cutter bar assembly.
Considerations for mounting implements and ensuring tractor stability.
Determining weights, axle loads, and necessary ballasting for safe operation.
Calculating the real front axle load and comparing it to permissible values.
Calculating the real total weight and comparing it to permissible values.
| Brand | NOVACAT |
|---|---|
| Model | 225 ED |
| Category | Lawn Mower |
| Language | English |
Loading...