Need help?Do you have a question about the NOVANEX Inova OnTime and is the answer not in the manual?
General| Power Source | Battery |
|---|---|
| Battery Type | AA |
| Battery Count | 2 |
| Alarm | Yes |
| Snooze Function | Yes |
| Time Format | 12-hour |
Identifies different firmware versions and clock models.
Steps required before installing any display unit.
Procedure for inspecting clocks upon arrival.
Planning the PoE power solution for clock installation.
Recommended procedure for mounting analog clocks on a surface.
Instructions for mounting double-sided analog clocks.
Recommended procedure for mounting digital clocks on a surface.
Procedure for pendant mounting digital clocks.
Procedure for cantilever mounting digital clocks.
Recommended procedure for flush mounting digital clocks.
Steps to power up and verify installed clock units.
Explains Simple Network Time Protocol for time synchronization.
Overview of the support site for clock system management.
Key configuration items for a clock: IP address, time server, time zone, DST.
How DHCP options are used for clock configuration.
Required DHCP settings for proper local time display.
Recommended practice for testing and rolling out DHCP configurations.
How to create configuration strings for DHCP server options.
Configuring OnTime Management settings via DHCP option.
Using custom DHCP option numbers for clock configuration.
How to list and verify current DHCP configuration settings.
Example of configuring DHCP options on a Microsoft Server.
Steps to establish a telnet connection to the clock.
Options for configuring an IP address for the clock.
Command to set or view the clock's current time zone.
Process for setting daylight saving time rules.
Details Novanex's warranty terms and conditions.
Procedure for obtaining service and returning defective products.
To Next Page