2
1. COPYRIGHT INFORMATION
This product or document is protected by copyright and distributed under licenses restricting its use,
copying, distribution, and decompilation. No part of this product or document may be reproduced in any
form by any means without prior written authorization of Novanta Corporation and its licensors, if any.
Microsoft and Windows are registered trademarks of Microsoft Corporation.
2. TECHNICAL SUPPORT AND CONTACT INFORMATION
Telephone: 315.701.0678 https://www.jadaktech.com
Email: rfid-support@jadaktech.com
3. REVISION HISTORY
Partial Draft for early-access release.
Updated Mechanical parameters and regional frequency
specs
Updated Regional Frequency Specs for AU, ID and RU
Updated DC power requirements, added CB schematics,
removed Preliminary watermark
Updated Module Specifications
Updates to Regulatory support section & CB schematics
Fixed an error in page numbering
Section 8.1 – Updated reference Regulatory
Standards: FCC CFR 47 Part 15 Subpart C 15.247 &
ISED RSS-247
Section 5.8 – Identified the RF mode used for certification
Corrected Page Numbering and updated all tables with
correct page numbers.
Section 5.8 – added reference to KDB 996369
Section D04 to notify host product manufacturers that
they are responsible for following the FCC Module
Integration Guide
Section 10.1.1.2 – added a reference to FCC KDB
784748 which describes FCC labelling requirements
for end products
Section 5.7 - Added a note to alert the host product
manufacturer that this module includes unique
connectors.
Added Section 5.8.1 –List of recommended RF
Antenna Connectors.
Added Section 5.8.2 – RF Trace Characteristics
Added Section 5.8.3 – Required Tests for Compliance
Added Section 5.8.4 – Host Board Design Specs.
2024 Novanta Inc. and its affiliated companies. All rights reserved.
To Next Page