Novar Lingo SE - User Manual

Lingo
®
SE Baseplate Installation Instructions
Description
The Lingo
®
SE Energy Infosystem is the next generation control processor that
functions as a system network manager and control monitor in Novar’s Logic
One
®
Advanced Building Control System.
Lingo SE monitors and logs the operations of the local
control modules, manages network communications,
and provides expandable and integrated control of the
building’s equipment. Lingo SE’s processing power,
compatibility, and multiple network capabilities
provide optimum control to cut energy costs, increase
comfort, and reduce equipment maintenance.
This document provides instructions for mounting and
wiring the Lingo SE baseplate and checking the
installation.
Lingo SE Specifications
Agency Approvals
Listed device: CUL/UL E90949
Standards used: UL 916, Energy Management Equipment
CSA C22.2, No. 205-M1983, Signal Equipment
Power Requirements
Voltage: 24 VAC, Class 2
Consumption: 40 VA
Input/Output Ratings
Analog Inputs: 4 to 20 mA
Digital Inputs: Contact closure only
Output (Fault): 24 VAC or VDC, 1 amp, Class 2
Operating Environment
Lingo SE with Touchscreen:
Operating temperature: 41° to 122°F (5° to 50°C)
0–80% RH, noncondensing
Storage: –4° to 158°F (–20° to 70°C)
0–90% RH, noncondensing
DOC. #569066200—C 8/17/06 1

Summary

Description

Lingo SE Specifications

Agency Approvals

Details UL/CSA certifications for the Lingo SE.

Power Requirements

Specifies voltage, consumption for the Lingo SE power supply.

Input;Output Ratings

Lists specifications for analog inputs, digital inputs, and outputs.

Operating Environment

Outlines temperature and humidity limits for Lingo SE operation and storage.

Precautions

Mounting the Lingo SE Baseplate to the Wall

Required Mounting Items

Lists baseplate, hex wrench, and screws for mounting.

Mounting Procedure

Step-by-step guide for securely attaching the Lingo SE baseplate to a wall.

Supplying the Lingo SE with Power

Power Supply Requirements

Details transformer specifications, distance, and wire gauge for powering the Lingo SE.

Wiring Power Connections

Instructions for connecting the 24 VAC transformer to the Lingo SE terminals.

Wiring the Lingo SE Inputs and Outputs

Outdoor Light Sensor Wiring

Connects the Novar Analog Light Sensor (ALS) to specific Lingo SE terminals.

Outdoor Temperature Sensor Wiring

Connects the Novar Outdoor Temperature Sensor (OTS/2) to Lingo SE terminals.

Outdoor Humidity Sensor Wiring

Details connecting the humidity sensor to Lingo SE terminals.

Demand Pulse Input Wiring

Connects pulse-type utility meter or watt transducer to Lingo SE.

Phase Loss Sensor Wiring

Connects electrical phase loss monitor output to Lingo SE.

Emergency Status Input Wiring

Connects emergency monitoring system output to Lingo SE.

Module Communications

Module Communications Wiring

Procedure for connecting module communication cables using shielded wire.

INCOM Terminal Connections

Steps for connecting INCOM cables to specific Lingo SE terminals (19-21).

Checking Installation

Installation Verification Steps

Confirms baseplate security and wiring correctness before reattaching the cover.

Model and Part Numbers

Novar Lingo SE Specifications

General

Brand	Novar
Model	Lingo SE
Category	Computer Hardware
Language	English