NOVATEK-ELECTRO LTD
Intelligent Industrial Electronics
Protocol converter
ЕТ- 485,
ЕТ- 485-24
OPERATING MANUAL
Quality control system on the development and production complies with requirements
ISO 9001:2015, IDT
CAUTIONS
Carefully study the operating manual before using the appliance.
Place the unit under operating conditions and wait at least 2 hours before connecting it to the electricity
mains.
Do not use abrasives or organic compounds (alcohol, gasoline, solvents, etc.) for cleaning.
DO NOT OPEN AND REPAIR THE EQUIPMENT YOURSELF.
It may contain energized parts.
DO NOT OPERATE THIS UNIT IN CASE OF ANY MECHANICAL DAMAGE TO THE CASING.
DO NOT EXPOSE THIS PRODUCT TO WATER OR OPERATE IN A HIGH HUMIDITY
ENVIRONMENT.
This is a safe in service unit if complying with operating procedures.
UKRAINE, Odessa www.novatek-electro.com
To Next Page
Need help?
General
