Novatel U620L - At+Gcatt

U620L AT Command Reference Guide 136
AT+GCATT
Command
AT+GCATT
Command Function
PS Attach Or Detach state list supported
NOTE: PS Attach Or Detach. Dut must be attached to network before this is run.
Attach or detach the device from the Packet Domain service
Query Syntax
AT+GCATT=?
Query Response
+CGATT: (0,1)
Write Syntax
AT+GCATT=<state>
Write Response
OK
Read Syntax
AT+GCATT?
Read Response
+CGATT: 1
Execute Syntax
Execute Response
Unsolicited Response
Parameter Values
— <state>
0 - detached
1 - attached
Notes
Examples