Swing sync
In addition to setting a Swing value manually with the Tempo control, it is also possible to set a
global Swing Sync Rate. This acts as a “range” control, and denes the tempo interval by which
the Swing parameter will shift alternate notes. The default value is a semiquaver, i.e., one Step
(though in practice, a Swing of a whole tempo interval is not achievable due to the restricted
range of the Swing control).
Press and hold Shift
15
and Tap
3
simultaneously to see Swing Sync View.
Pad for current setting is lit
white. Default is Pad 5 (1/16).
1 2 3 4 5 6 7 8
Only the top row of pads are used: one pad will be illuminated white, indicating the currently
selected Swing Sync Rate, according to the table below:
Pad Sync Rate
1 1/4
2 1/4 T
3 1/8
4 1/8 T
5* 1/16
6 1/16 T
7 1/32
8 1/32 T
* Default value
Note that triplet intervals (denoted by ‘T’) are available as well as standard tempo intervals.
To Next Page
Loading...
