Novation Nocturn 25 - Front Panel Controls

4
fRont panEl
1) 8 touch sensitive endless rotary encoders with LED rings: These controls have no end points, so offer full 360˚
of movement. These controls offer speed dependent variable resolution, so moving the encoder slowly gives fi ner
resolution than moving the encoder quickly.
2) 8 buttons: All buttons are back-lit with LEDs.
3) Automap Buttons: These 8 buttons are used for Automap Software navigation and control.
4) Octave / Transpose / MIDI Channel buttons:
Press - or + to transpose the keyboard up or down by one octave. Press and release both buttons together to reset
the octave.
Press - AND + together and hold, then press the keys below transpose - and + to transpose the keyboard up and down
by one semitone. Press both keys together to reset the keyboard transpose.
Press - AND + together and hold, then press the keys below MIDI channel 1 - 16 to change the keyboard MIDI Channel.
5) Transport Lock button: Press to switch transport buttons from transport control to freely assignable buttons.
6) 6 Transport buttons
7) 8 velocity-sensitive drum trigger pads.
8) Pitch wheel
9) Modulation wheel
10) Speed Dial Knob: The Speed Dial function acts as a way of controlling the computers mouse using
the Nocturn Keyboard. When this button is pressed down it acts as a preset selector.
11) Keyboard: The Nocturn Keyboard range is available in 25 or 49 note keyboard versions.
FA0331-02
Nocturn 49 screen printing
5 6 7 8
fxuser inst mixer
1
2 3 4
learn view
page page
1
10
11
8
2
3
9
6
5
4
7