08/10 Rev. 5.05-01 TECHNICAL MANUAL
64-xx
Mounting the PLC
System Requirements ................................... 2
Printer ........................................................ 2
Applicator .................................................. 2
PLC module .............................................. 2
Assembly ...................................................... 3
Safety ........................................................ 3
Required Tools .......................................... 4
Fitting the Cable Harness .......................... 4
Fitting the PLC .......................................... 4
Connecting the PLC for LTP/LTPV
operation ................................................... 7
Connecting the PLC for LTSI operation .... 8
Appendix ..................................................... 10
Connection Diagram 64-xx ...................... 10
Signal-LEDs at the PLC .......................... 12