This document provides assembly instructions and product information for a locker, identified by model numbers 3384810COMNUK, 3384811COMNUK, 3384813COMNUK, and 3384814COMNUK. The manual is presented in multiple languages, including German, French, Dutch, Czech, Hungarian, Turkish, English, Italian, Polish, Slovak, Romanian, and Russian, covering service, assistance, and assembly instructions.
Function Description
The device is a multi-purpose locker designed for storage. It features adjustable shelves and two doors, making it suitable for organizing various items in different settings such as homes, offices, or garages. The locker is designed to be stable and secure, with a wall fastening mechanism to prevent tipping, ensuring safety during use.
Important Technical Specifications
The locker is composed of several key components:
- Side Panels (A): Two units, forming the vertical sides of the locker.
- Left Back Panel (B1): One unit, forming the left portion of the back.
- Right Back Panel (B2): One unit, forming the right portion of the back.
- Left Door (C1): One unit, for the left side of the front opening.
- Right Door (C2): One unit, for the right side of the front opening.
- Top (D): One unit, forming the top surface of the locker.
- Legs (E): Two units, providing support and elevation for the locker.
- Bottom (F): One unit, forming the base of the storage compartment.
- Adjustable Shelves (G): Two units, allowing for flexible storage configurations.
The hardware components include:
- 1 (TM0001): Ø6*70mm screws (x2)
- 2 (TM0002): Ø6X30mm screws (x2)
- 3 (TM0003): Ø12*0.8mm washers (x2)
- 4 (TM0004): Ø4X4mm screws (x4)
- 5 (TM0005): Ø9*0.8mm washers (x4)
- 6 (TM0015): Handles (x2)
- 7 (TM0007): Shelf clips (x8)
- 8 (TM0008): Ø6*12mm screws (x2)
- 9 (TM0009): Ø8*38mm wall plugs (x2)
- 10 (TM0010): Ø4*38mm screws (x2)
- 11 (TM0011): Wall strap (x2)
The weight capacity of the locker is specified as follows:
- Top surface: 60 lbs./27.3 kgs
- Upper adjustable shelf: 20 lbs./9.1 kgs
- Middle adjustable shelf: 20 lbs./9.1 kgs
- Bottom shelf: 30 lbs./13.6 kgs
Usage Features
The locker is designed for self-assembly, with clear, step-by-step visual instructions provided.
- Preparation: Before assembly, it is crucial to check all components against the parts list to ensure everything is present and undamaged. Assembly should be performed on a soft, clean surface (e.g., a carpet) to prevent scratching the parts.
- Base Assembly: The legs (E) are attached to the side panels (A), forming the initial frame.
- Back Panel Assembly: The left back panel (B1) and right back panel (B2) are joined together.
- Frame Integration: The assembled back panels (B1, B2) are then integrated with the side panels (A) and legs (E), creating the main structure.
- Bottom Panel Installation: The bottom panel (F) is secured into the base of the locker, providing the first storage surface.
- Top Panel Installation: The top panel (D) is attached to the upper part of the side panels (A), completing the main enclosure.
- Shelf Installation: The adjustable shelves (G) are installed using shelf clips (7), allowing users to customize the internal storage space. The clips are inserted into pre-drilled holes on the side panels.
- Door Attachment: The doors (C1, C2) are attached to the main frame using screws (2) and washers (3), ensuring smooth operation.
- Handle Installation: Handles (6) are attached to the doors using screws (4) and washers (5).
- Wall Fastening: A critical safety feature is the wall fastening mechanism. The wall strap (11) is used with screws (8), wall plugs (9), and screws (10) to secure the locker to a wall. This prevents the locker from tipping over, especially important in households with children or in areas prone to seismic activity. The manual explicitly states that this fastening is mandatory and that a special wall plug might be required depending on the wall type.
Maintenance Features
The manual provides general advice for maintaining the locker:
- Cleaning: For general cleaning, it is recommended to use only a damp cloth. Harsh or abrasive cleaners should be avoided as they can damage the surface.
- Hardware Tightening: All screws and fittings should be checked and retightened approximately 5 weeks after assembly to ensure long-term stability and security. This is a crucial step to prevent loosening and potential structural issues over time.
- Surface Protection: To prevent damage, it is advised to avoid placing hot or heavy objects directly on the surface without protection.
- Chemical Avoidance: The use of chemical cleaning agents or abrasive materials is strictly prohibited as they can cause irreversible damage to the locker's finish.
Need help?
General
To Next Page
