How to fix a novos Bilisphere 360 LED Medical Equipment device that won't start?
If your NOVOS Medical Equipment device isn't starting up, first ensure the power cord is securely connected to a working outlet. Also, verify that the main power switch is in the 'I' (on) position. If the issue persists, it could be due to a defective fuse or an internal electrical problem, and you should contact an authorized NOVOS Technical Service.
What to do if therapy does not start on novos Bilisphere 360 LED?
If the therapy on your NOVOS Medical Equipment isn't starting, first check that the air probe is properly connected. Also, ensure the baby-bed drawer is completely closed. If these steps don't resolve the issue, it may be due to faulty software, in which case you should contact an authorized NOVOS Technical Service.
How to calibrate the touchscreen on novos Bilisphere 360 LED?
If the touchscreen on your NOVOS Medical Equipment is not working correctly, try restarting the device and recalibrating the touchscreen via the settings menu. This should resolve the issue if the calibration was missing.
Why don't lamps light up on novos Bilisphere 360 LED Medical Equipment?
If the lamps on your NOVOS Medical Equipment aren't lighting up, check if the air temperature is above 37 °C. If it is, wait for the temperature to drop below 37 °C. If the issue persists, it might be an internal electrical problem, requiring you to contact an authorized NOVOS Technical Service.
What causes the upper piece to not rise on novos Medical Equipment?
If the upper piece of your NOVOS Medical Equipment isn't rising, it could be due to a faulty motor, faulty software or a blown fuse on the motor driver board. In any of these cases, you should contact an authorized NOVOS Technical Service.
General| Brand | novos |
|---|---|
| Model | Bilisphere 360 LED |
| Category | Medical Equipment |
| Language | English |
To Next Page
