Need help?Do you have a question about the Novra S400 PRO and is the answer not in the manual?
Explains formatting for typed text, file paths, and button labels for clarity.
Lists the Novra Receiver models covered by the manual.
Explains how models are referred to in the manual.
Details how the S400 PRO works as a satellite receiver and its management via a web browser.
Illustrates the hardware setup and connection diagram for the S400 PRO receiver.
Lists necessary information like LO Frequency, Band, Polarization, Symbol Rate, and IP addresses for setup.
Details the status bar indicating device health, tuner lock status, and LNB activity.
Explains the left-hand menu structure used to navigate and access S400 PRO configuration sections.
Provides details for each tuner (RF1/RF2), including DVB mode, signal quality, and packet counts.
Covers configuration of satellite tuners and Ethernet interfaces on the S400 PRO.
Details configuration for RF1, including DVB signal parameters, filters, and LNB settings.
Describes optional RF2 tuner setup, noting its differences and potential lack of LNB control.
Explains configuration of IP settings for the DATA (LAN1) Ethernet interface.
Details configuration for the Management and Control (LAN2) Ethernet interface, including IP, DNS, and SNMP.
Describes the simplest service forwarding mode, allowing entire stream or PID forwarding.
Explains forwarding DVB PID bundles (SPTS) for MPEG streams, specifying stream details and PIDs.
Details forwarding DVB MPE/ULE PIDs for IP over satellite applications.
Provides system information for support and diagnostics, including version, uptime, and tuner status.
Explains options to save, restore, and apply factory default S400 PRO configurations.
Guides on configuring time zone, NTP server, or manual date/time settings.
Details how to change the S400 PRO password by entering current and new passwords.
Explains how to select and upload an upgrade file for the S400 PRO.
Describes how to reset software services or reboot the S400 PRO unit.
Addresses issues with no response from the S400 PRO when accessing via browser.
Helps diagnose issues with the receiver failing to lock to the configured settings.
Troubleshoots scenarios where the receiver locks to a signal but no data is received.
Details RF tuner, demodulation, FEC, LNB power/control, and status indicators.
Specifies minimum browser and system requirements for operating the S400 PRO.
Lists the items that should be included with the Novra S400 PRO Receiver.
Defines technical terms like DVB, FEC, LNB, IP Address, and Polarization.
To Next Page
General