Novra S300 User Manual

Version: 2.02 Confidential and Proprietary 1 of 50
Novra S300 Receiver
User Manual
Subject to change without notification
CAUTION: Any changes or modifications not expressly approved by the manufacturer could
void the user's authority to operate this equipment.

Novra S300 Specifications

General

Brand	Novra
Model	S300
Category	Receiver
Language	English

Summary

Getting Started with the S300

Typical S300 Installation

Basic Configuration Information Required

Software Installation on Windows 7

S300 Startup and Connection Procedures

Main Console Screen Overview

Configuring the Novra S300 Receiver

Network and Satellite Interface Setup

Configure network IP settings and satellite signal parameters for receiver operation.

IP Data and Re-Mapping Configuration

Configure IP data reception and multicast IP address re-mapping rules.

Program and PID Configuration

Configure MPEG video, MPE data, and PIDs for forwarding to multicast addresses.

Control and File Management

Troubleshooting Common Issues

Receiver Detection and Connection Problems

Solutions for issues where the S300 Console cannot detect or connect to receivers.

Configuration and Signal Lock Issues

Troubleshooting problems related to receiver configuration and achieving signal lock.

Data Reception and IP Mapping Problems

Resolving issues with data reception, packet mapping, and network traffic.

Specifications and Requirements

Receiver Characteristics

Hardware Capabilities and Interfaces

System Requirements and Supplied Equipment