Use
Before using for the first time
Before using the appliance for the first time you
should clean the interior and the exterior, following
the cleaning instructions given in the section
“Cleaning and Maintenance”.
Then heat the warming drawer for at least 2
hours. For this, set the temperature to the
maximum position.
Make sure the kitchen is well-ventilated when you
are doing this.
The appliance’s parts are protected by a special
product. For this reason, during the first heating
an odour will be released. Both the odour and any
smoke that may form will disappear after a short
time and neither signifies that there is anything
wrong with the connection or the appliance.
Control Panel
1. Delayed Start indicator light
3. Temperature indicator light
7. “-” (decrease) / OFF key
8. Operation indicator light
To Next Page
Loading...