To Next PageTo Next PageWhat to do if the plug-in appliance does not work with my NPower Remote Starter?
If your NPower Remote Starter appliance isn't working, first recharge the jumpstarter if the battery has discharged to 10V. If that doesn't solve the issue, check the fuse and replace it if it's blown. Also, make sure the appliance power doesn't exceed the standard; use an appliance with lower power.
Why my NPower 457801 Remote Starter can't jump start my car?
Your NPower Remote Starter might fail to jump start a vehicle if the battery in the jumpstarter is not fully charged. In this case, charge it for at least 28 hours. Alternatively, the jumpstarter’s battery may be damaged, requiring a replacement.
How to fix NPower 457801 that does not recharge?
If your NPower Remote Starter isn’t recharging, ensure that no accessories are connected to the 12V DC socket; disconnect them. If the issue persists, the 110V AC charger might be damaged and need replacement.
General| Brand | NPower |
|---|---|
| Model | 457801 |
| Category | Remote Starter |
| Language | English |
Overview of the NPOWER 800A Jumpstarter's capabilities and intended uses.
Lists the components included with the jumpstarter unit.
General safety advice and cautionary notes for using the jumpstarter.
Warnings about fire/explosion risks from sparks, flammable materials, and battery gases.
Safety instructions for battery disposal, heat, moisture, and water exposure.
Advisories against jump starting frozen batteries and operating the power switch.
Overview of front panel controls, buttons, and LED indicators.
Explanation of LED indicators for battery charge level.
Details on charging jack, charging indicator, and 12V DC socket.
Identification and connection notes for battery clips and handle.
Description of the jumpstart power switch and replaceable fuse.
Specifications and features of the AC charging adapter.
Conditions for safe and optimal operation of the jumpstarter.
Critical safety warnings for connecting cables and polarity.
Step-by-step guide for jump starting a vehicle.
Limit on engine cranking time during jump starting to prevent unit damage.
Safety warnings for recharging the unit in different conditions.
Recommendations for recharge frequency and restrictions during charging.
Procedure and specifications for recharging using the AC charging adapter.
Procedure and warnings for recharging using the jumpstart clips.
Information on charging the unit using a DC to DC cable.
Cautions and warnings for DC to DC charging to prevent hazards.
Information on using the 12V DC outlet for accessories.
Identifies common problems, their causes, and solutions.
Key technical specifications of the jumpstarter and its components.
Details of the product's warranty coverage, terms, and conditions.
